Step By Step Guide For T-Shirt Printing Process

Posted by

Step By Step Guide For T-Shirt Printing Process

The screen-printing process, used today worldwide for printing on garments, was initially developed in China over 1000 years ago and in essence, has changed very little. Developments in materials, inks, and chemicals have refined the process, but the basic method of passing inks or dyes through a mesh screen on to the printable surface remains the same.

It is possible to get similar quality prints, whether you are using homemade manual equipment in your garage or operating large digital apparel printing machines in a factory – one thing that will vary greatly, though it is production times. The following explains the basic ‘spot color’ process from somewhere in between, i.e., working with a small-scale professional set-up using a manual printing carousel:

Step 1: Differentiate Colors In The Design

Separate the colors in the design using standard software such as Adobe Illustrator or Corel Draw – or to employ the services of any one of a number of graphic designers advertising on the internet. For each color, a screen has to be produced, which will be used in turn with all the others to print the image.

If printing on to dark garments, an extra screen to produce a ‘flash’ undercoat of white ink will be needed to make the colors in the design more vivid. Once the colors have been separated, they are printed to scale in black on to acetate sheets, together with registration marks, using a standard ink-jet printer. The blacked our artwork then has to be transferred to the prepared screens.

Step 2: Prepare The Screens

The standard screens used have a metal or wooden frame with a tightly woven mesh, usually made of nylon or polyester, stretched across them. Screens with different mesh counts are used depending on the intricacy of detail in the design.

Generally speaking, higher mesh counts are used to reproduce more detail as less ink can pass through the screen. Screens are prepared by coating them with a photo-reactive (light-sensitive) emulsion and then left to dry flat in an area free from UV light.

When this solution is dry, the screens are ready to have the artwork ‘burned’ or exposed on to them. But in the case of digital printing on garments, you do not need to use stencil because work being processed by a computer and finally printed directly onto the garment surface.

Step 3: Produce Image On The Screen

A lightbox is now used, which is basically a box containing UV light-emitting tubes, a clear glass surface above, and a material lid. Each acetate is placed upon the glass area and a prepared screen laid on top – mesh side down. After that, the material lid is closed and drawn tight over the screen using a vacuum pump – a timer is then set while the image is developed on to the screen.

Step 4: Wash The Screen

The emulsion on the screen now reacts and hardens where the UV light hits it and stays soft where the areas of opaque black areas on the acetate block it. After completion of a specified time (between 1 and 20 minutes depending on the intensity of UV light), the screen is ready to be clean with water. The water washes away the region of emulsion that has not developed, creating areas on the mesh for the inks to pass through.

Step 5: Apply Masking Tape

After the developed screens have dried, masking tape is applied around the edges to prevent ink seeping through areas that it should not. Each screen is then clamped onto an arm of a carousel, mesh side down, and special ‘plastisol’ or water-based ink in each corresponding color applied on top. To register or line up, the screens a scrap piece of material is placed over the platens, and a test print is produced.

This is done by forcing the ink through the clear spaces in the mesh using a hand-held rubber ‘squeegee,’ printing the lighter colors first. If printing on to dark-colored garments, the flash coat of white is printed and then passed under a heat lamp to touch dry before the colors are applied.

Step 6: Produce Registered Image

The registration marks that are printed onto the scrap material are lined up in turn until the finished, registered image is produced. To cure the ink, the printed garment is placed on the conveyor belt of a tunnel dryer and heated to 320 degrees F (160 C). This will prevent the ink from washing away to ensure the image will remain for as long as the garment lasts.

Final Words

There are a lot of different uses for T-shirt printing. A business can use custom promotional T-shirts to get their logos and slogans in front of a lot of people. Sports teams can use them so that every team member has a matching shirt. Individuals can get custom shirts made to express their own sense of style and to have a unique garment that nobody else has.

There are a lot of people interested in custom garments for different reasons, and there are a number of methods for T-shirt printing. Read the above-mentioned steps to print your designs on your t-shirt.

Disclaimer : This and other personal blog posts are not reviewed, monitored or endorsed by Cryptoknowmics. The content is solely the view of the author and Cryptoknowmics is not responsible for the authenticity of content of this post in any way. Our curated content which is handpicked by our editorial team may be viewed here.

Leave a Reply

Your email address will not be published.